1. Press POP-UP menu on the remote (GUIDE on Universal Remote)
  2. Select Setup
    epg
  3. Choose Network and press ENTER (OK on Universal remote)
    network
  4. In the Connection select: Wireless (WiFi)
  5. In the Mode section it should be: Automatic (DHCP) by default
    mode
  6. Click on Scan and press Enter
    ssid
  7. Wi-Fi Settings window pops up. Select your WiFi and press ENTER
    ssid1
  8. In the Security select WPA2 AES
  9. In the Password type the WiFi password using your remote
    password
  10. Click on OK to close the WiFi settings window
    10
  11. Click on Apply and press ENTER on the remote
    %d1%84%d0%b7%d0%b7%d0%b4%d0%bd
  12. ‘Waiting for IP address’ window pops up. Wait until the box gets IP address. If the IP address appears – the connection was successful. If the wait is longer than 60 sec check if you have the Internet
    ip

DUNE boxes already have built in WiFI, the antenna only makes the signal stronger.

Tagged:

Leave a Reply

Your email address will not be published. Required fields are marked *


CAPTCHA Image
Reload Image