How to program Alfabox remote control to work with any TV

Alfabox remote control can be programmed to control any TV in just a few steps.  Buttons that can be programmed are highlighted by a solid white line at the top of the remote. New remote control To program the buttons do the following: Press the «On/Off» and «A/V» buttons at the same time and hold it for 2 […]

Read More

How to fix endless restarting of the box with the message “Alfabox”

Please disconnect the LAN (internet) cable from the box.  After that, you will see a window with the message on the top – “Page loading error”. (If you  won’t see this message then use this link to fix the issue). Press “Ok” button on the “System settings”. Choose the icon “Video” and press “Ok”. Select “Video output mode” and use […]

Read More

Alfabox UX1 specification

Alfabox advantages: High quality of sound and image (supports all modern video and audio formats, including full HD) Compatible with any TV (HDMI and RCA television compatible) Flawless Design (lightweight, elegant design that will fit in with any interior) Maximum Comfort (remote control enables you to control not only set-top-box but also the other devices) […]

Read More

How to update firmware on Alfabox UX3

Below you can find a detailed process of firmware updating to new stable version: 1. Go to box settings/software update    2. Press “OK” on the remote to verify and get pop-up information page   3. Press “F1” on the remote to update 4. It will be restarted automatically when it’s done. Important! Do NOT restart/turn-off the […]

Read More

MAG system settings

SYSTEM SETTINGS Click SET (or SETUP) on the remote to go to System settings. IMPORTANT! DO NOT EVER SELECT Reset settings VIDEO Select Video to change the resolution. If your TV is connected to the Alfabox via composite cable (A/V), select video output mode: NTSC 480. If you are using HDMI cable select: 720 or 1080 […]

Read More

Instrukcja podłączenia portalu na MAG 250/254/255

Aby aktywowac Twój nowy odbiornik w Polish TV Company postępuj zgodnie z poniższą instrukcją: Gdy odbiornik się naładuje zobaczysz główny ekran z ikonkami. Naciśnij SETUP/SET na pilocie. Zobaczysz ekran z ‘System Settings‘ Poruszając się strzałkami przejdź do ‘Servers‘ i naciśnij OK na pilocie Wybierz opcję ‘Portals‘ i potwierdź naciskając OK na pilocie W linijce ‘Portal 1 […]

Read More

How to re-install firmware on Alfabox UX1/UX2

Follow instructions to update the firmware on Alfabox UX1/UX2 from the USB drive: Prepare empty USB drive. Format the USB drive to FAT32 format. Usually, it’s the default format. Download Bootstrap and Firmware files to your computer according to your box model from the table below. Create the folder in the root of USB drive: […]

Read More